CABRIODOC Germany | Home CABRIODOC Germany | products CABRIODOC Germany | know how mb r/c107 CABRIODOC Germany | Instruction Manuals contact
 
   
 
   
Vinyl Artificial Leather Repair without patches or glue  

CABRIODOC Liquid Vinyl Repair System
Tube 10 ml (~ 0.34 fl oz) sufficing for 25 cm (~ 10 in) long cut / seam 

Processing temperature 15-30 °C (59-86 °F)!

Liquid Vinyl Black or Universal Transparent Mat:
DIY repair of all brand car seats, boat seats, furniture seats + sofas, whirlpool (for example: SOFTUB pools) inner liner, skin  made of artificial leather, vinyl and leathertex. Universal transparent mat for all colors. The original color shines through and makes the color effect.

Liquid Vinyl is also available in other colors for Mercedes-Benz classic cars 1971-1989.

Not suitable for: glass windows, rubber, hard-plastic, hard vinyl, metal and genuine leather!

Permanent repair of tears, rips, punctures, cuts, cracks and gaps without using patches,
glue or adhesive films.

Liquid Vinyl makes a durable and flexible connection with the original material. It is not a generic glue, cement glue or a solvent-synthetic resin adhesive product. It uses a unique formula without interfering substances like resin or silicone.

Liquid Vinyl is medium viscous and can be applied on sloping areas.

After a cure time of 12 hours it is like the original material resistant to water, alcohol, most solvents, fuels, oil, saltwater, UV curing and for temperatures of -40 to +120 °C (-40 to +248 °F).

Processing

Clean and dry the hole seat. Do not clean partial area. Do not use solvent based cleaners,  acetone, paint thinners, gasoline (petrol) or bleaching agents. Use CABRIODOC Plastic-Cleaner-Concentrate or iso-propanol. Adhesives and sealants from prior trial repairs must be entirely removed! Liquid Vinyl bonds only on clean genuine surfaces.

Do not touch or treat Liquid Vinyl until it is fully cured!

It is not possible to apply a graining on Liquid Vinyl!

Avoid excessive air movement or humidity!

Apply Liquid Vinyl directly to the repair area allowing an extra 3-5 mm (~0.11 to 0.19 in) around the damaged area with a hight of 1-2 mm (~ 0.04 to 0.08 in). Liquid vinyl shrinks about 80% after curing.

On wide cracks with visible seat foam insert a sheet of baking parchment or aluminum foil the cover the foam. This prevents the Liquid Vinyl to be absorbed by the foam. Long and wide cracks can be pulled together step by step with masking tape. Do not use plastic tapes. Plastic tape will bond on Liquid Vinyl. Apply Liquid Vinyl to the untaped areas and let it cure 6 hours. Remove tape and apply additional Liquid Vinyl to these areas to finish repair. Liquid vinyl can be applied in several layers
wet-on-wet or fully cured.

Liquid Vinyl is touch dry in 3-6 hours and fully cured in 10-12 hours.

Processing temperature 15-30 °C (59-86 °F). Store in dry rooms at temperature 0-30 °C (32-86 °F).

 

 
   
  ,