CABRIODOC Germany | Home products Technic mb r/c107 CABRIODOC Germany | Instruction Manuals contact
 
   
CABRIODOC Germany | Convertible Vinyl Soft Top Rear Window Repair without patches or glue  
   
Convertible Vinyl SoftTop Rear Window Repair without patches or glue  

Convertible Vinyl SoftTop Rear Window Repair without patches or glue

CABRIODOC Liquid Vinyl Window Repair System

Tube 10 ml (~ 0.34 fl oz) sufficing for 25 cm (~ 10 in) long cut / seam 

Processing temperature 15-30 °C (59-86 °F)!

Liquid Vinyl Transparent Crystal Clear Glossy:
DIY repair of all brand convertible car and boat SoftTop windows made of vinyl soft plastic (PVC)

Not suitable for: glass windows, rubber, hard-plastic, hard vinyl, metal and genuine leather!

Permanent repair of tears, rips, punctures, cuts, cracks and gaps without using patches, glue or adhesive films.

Liquid Vinyl makes a durable and flexible connection with the original material. It is not a generic glue, cement glue or a solvent-synthetic resin adhesive product. It uses a unique formula without interfering substances like resin or silicone.

Liquid Vinyl is medium viscous and can be applied on sloping areas.

After a cure time of 12 hours it is like the original material resistant to water, alcohol, most solvents, fuels, oil, saltwater, UV curing and for temperatures of -40 to +120 °C (-40 to +248 °F).

Processing

Clean and dry the hole soft top window. Do not clean partial area. Do not use solvent based cleaners,  acetone, paint thinners, gasoline (petrol) or bleaching agents. Use CABRIODOC Vinyl-Cleaner-Concentrate or iso-propanol for vinyl windows. Adhesives and sealants from prior trial repairs must be entirely removed! Liquid Vinyl bonds only on clean genuine surfaces.

Do not apply Liquid Vinyl on wet window!

Do not touch or treat Liquid Vinyl until it is fully cured!

Avoid excessive air movement or humidity!

Apply Liquid Vinyl directly to the repair area allowing an extra 3-5 mm (~0.11 to 0.19 in) around the damaged area with a hight of 1-2 mm (~ 0.04 to 0.08 in). Liquid vinyl shrinks about 80% after curing.

Wide cracks should be covered on the backside with paper masking tape. Otherwise Liquid Vinyl can drip through. Do not use plastic tapes. Plastic tape will bond on Liquid Vinyl. Long and wide cracks can be pulled together step by step with masking tape. Apply Liquid Vinyl to the untaped areas and let it cure 6 hours. Remove tape and apply additional Liquid Vinyl to these areas to finish repair. Liquid vinyl can be applied in several layers wet-on-wet or fully cured.

Liquid Vinyl is touch dry in 3-6 hours and fully cured in 10-12 hours.

Processing temperature 15-30 °C (59-86 °F). Store in dry rooms at temperature 0-30 °C (32-86 °F).